||
Next >
Olympic Machined Plate | OM Series
Regular price
$ 8.50
Regular price
$ 10.00
Sale price
$ 8.50
Unit price
per
Couldn't load pickup availability
Product Specifications
Product Specifications
| Part No. | Description | Diameter | Thickness |
|---|---|---|---|
| OM-1.25 | 1.25 lb - Single plate - GREY/GREEN - FINAL STOCK | 5-1/4" | 1/2" |
| OM-2.5 | 2.5 lb - Single plate - GREY/GREEN - FINAL STOCK | 6-7/16" | 5/8" |
| OM-5 | 5 lb - Single plate - GREY/GREEN - FINAL STOCK | 7-3/4" | 7/8" |
| OM-10 | 10 lb - Single plate - GREY/GREEN - FINAL STOCK | 9" | 1-1/4" |
| OM-25 | 25 lb - Single plate - GREY/GREEN - FINAL STOCK | 11-13/16" | 1-9/16" |
| OM-35 | 35 lb - Single plate - GREY/GREEN - FINAL STOCK | 14-3/16” | 1-9/16" |
| OM-45 | 45 lb - Single plate- GREY/GREEN - FINAL STOCK | 17-3/4” | 1-9/16" |
| OM-1.25-1985 | 1.25 lb - Single plate - 1985 GREY | 5-1/4" | 1/2" |
| om-2.5-1985 | 2.5 lb-Single plate - 1985 GREY | 6-7/16" | 5/8" |
| OM-5-1985 | 5 lb - Single plate - 1985 GREY | 7-3/4" | 7/8" |
| OM-10-1985 | 10 lb-Single plate - 1985 GREY | 9" | 1-1/4" |
| OM-25-1985 | 25 lb - Single plate - 1985 GREY | 11-13/16" | 1-9/16" |
| OM-35-1985 | 35 lb Single plate - 1985 GREY | 14-3/16" | 1-9/16" |
| OM-45-1985 | 45 lb - Single plate - 1985 GREY | 17-3/4" | 1-9/16" |
| OM-100 | 100 lb - Single plate - 1985 GREY | 17-3/4” | 1-2/8" |
| OM-1.25kg | 1.25 kg - Single plate | 165mm | 15mm |
| OM-2.5kg | 2.5 kg - Single plate | 200mm | 23mm |
| OM-5kg | 5 kg - Single plate | 255mm | 28mm |
| OM-10KG | 10 kg - Single plate | 320mm | 30mm |
| OM-15KG | 15 kg - Single plate | 390mm | 31mm |
| OM-20KG | 20 kg - Single plate | 450mm | 37mm |
| OM-25KG | 25 kg - Single plate | 450mm | 40mm |
The Iconic IVANKO Plate
- + High-quality casting.
- + Machined on back and outer edge/face of circumference.
- + Holes machine drilled, not cast, to fit perpendicular on bar.
- + Chip resistant German-made baked-on polyester-based paint.
- + Available in pounds or kilograms.
NOTE: These cast-iron plates are manufactured by sand casting. They are not machined from solid billet. Due to the inherent nature of the sand casting process, no two plates are exactly alike. Variations will occur. Among these variations are surface consistency and porosity. These variations do not constitute defects, but are inherent to the casting process.
